Plastic Tampon

A: According to the designed artwork, the steel mold is produced. The production technology of the mold of some silicon rubber products is relatively high, and the time is relatively longer. Generally, the mold opening period is calculated according to five days, and the mold is completed within 7-15 days. After the proofing board confirms that the structure is correct, mass production can be produced.

A: After the packaging is completed, the quality inspection department will check whether the label, color, quantity, etc. of each box are consistent with the order. If no problem, the box will be sealed and deliver to you.

A: Perform a full inspection on the first product produced, whether it meets the product specifications, whether it matches the color required by the customer, whether it is dirty or lacks material, and other appearance defects. If there is any discrepancy, all will be discarded.

A: Each product will be produced with a phoenix. After the raw product has passed the inspection and inspection, the product will be sent to the process department for phoenix treatment. After the phoenix is processed, it is the finished product.

A: The artwork design is generally based on the sample or drawing provided by the customer to draw the production artwork. Generally, drawing software, such as CDR or Al software, is used. If the customer cannot provide the sample, we can follow the customer's request and cooperate with the customer for free. Slightly designed and produced.

A: Send the finished product to the quality inspection department for inspection to see if there is any poor handling of the front,etc., after the inspection is passed, the tensile, torsion, UV, and other functional tests are performed.